Basket Glide & Balance Kit

Prevent and Eliminate Basket Edges from Potentially Catching or Binding
Install Guideline:

1. Apply even coating of adhesive to the back of your glide.
2. Be mindful not to allow excess to run and/or transfer onto front side of glide.
3. With adhesive side facing away from silver aluminum rail and towards outer side of the basket,
   gently slide the glide into position as shown below, keeping the top edge of the glide as flush
   with the top edge of the basket as possible.
   Once your glide is in place, allow adhesive to set for at least 1hr before moving or adjusting basket to
   prevent loss of adhesion.
   NB* – The use of a pair of small clamps to support adhesion is advised.