Electric Tug To Pull Or Push Fully Loaded Server Cabinets

RackLift RL2000T Electric Tug

RL2000T Electric Tug

The RackLift RL2000T electric tug eliminates employee injuries caused by excessive push/pull associated with manual forces applied to roll cabinets manually or move loaded carts.   The tug does all the hard work with the push of a button found on the ergonomic handle that adjusts to the user’s height.  The variable speed control operates in forward or reverse up to three miles per hour (4.8 km/hr).  The panel includes an on/ off switch, emergency stop button, horn and battery level indicator.   The automatic sleep mode conserves battery power when not in use.  The tug comes to a controlled stop if the operator lets go of the controls.

The RL2000T is designed to tug weights up to 2,000 pounds (1,134 kg) so it’s an ideal match to pull the RL5000E or RL3000.  The unit accommodates a wide range of standard and custom hitches.  (ordered separately)

The tug is designed to handle harsh industrial environments with its heavy duty powder-coated steel construction and foam-filled never-flat drive tires.  The tires are also non-marking, maintenance-free tires ideally suited to the data center.

RackLift™ RL2000T Benefits

  • Horn For Safety Warning
  • Emergency Belly Button Stop Switch
  • Automatic Holding Brake Prevents Cart From Moving On Inclines When Parked
  • Auto-Stop Upon Release Of Controls
  • Non-Marking Maintenance-Free Tires
  • Deep Cycle AGM Rechargeable Batteries
  • On-Board Smart Battery Charger – UL, cUL Listed 120/240 VAC
  • Solid State Regenerative Braking
  • User Control Ingress Rating: IP54
  • Pallet jack style handle adjusted to fit any operator
  • Deep cycle AGM batteries provide over 2 times the life of standard AGM batteries
  • Battery Level Indicator
  • Welded Steel Frame Construction With Powder Coat Paint
  • Automatic Sleep Mode Conserves Battery Power

Specifications

Electrical Charging Voltage120/240 VAC, 50/60 Hz
Variable Speed Range
0-3 MPH (0-4.8 km/hr.) forward and reverse
Pulling Capacity2000 pounds (1,134 kg)
Length25 inches (64 cm) (excluding handle and hitch)
Width24 inches (61 cm)
Height
Height of drive unit 17 inches (43 cm), with handle 39 inches (1 meter)
Horse Power.6 HP
Battery PackDual/Quad
Operation Time Per Full Charge8 hours
FinishPowder Coat Steel Hardware
Weight350 pounds (159 kg)
Freight Dimensions and Weight48”L x 40”W x 60”H (122 cm L x 102 cm W x 153 cm H) 400 pounds (182 kg)

Hitch Selection

RL5K24 Hitch for RL5000 and RL3000

For Pulling RL5000E and RL3000.
Part number RL5K24

RL300PH Pintle And Hook Hitch

General Purpose Pintle & Hook Hitch.
Part number RL300PH

RL301BH Ball Hitch

General Purpose Ball Hitch.
Part number RL301BH

Custom Hitch

Example of A Custom Hitch