RACKLIFT™ RL3500 | 3500LB MANUAL SERVER RACK LIFTER

The RL3500 is a manual lift designed to lift and transport an entire, fully loaded cabinet.

With this rack mover one technician can easily move a server cabinet from one location to another.

By moving a fully loaded cabinet, your data center will save time that is normally wasted uninstalling and reinstalling devices just to relocate the cabinet.

A variety of different racks, empty or fully populated, can be lifted and moved using the RL3500.   It can also be used to raise cabinets temporarily to access the floor below and to lift cabinets from a pallet.

It is made of lightweight Aerospace 5052 aluminum for enhanced durability.  This is the ideal rack mount lift tool for your data center because now a single operator can relocate data center cabinets easily and safely.

HOW THE RL3500 RACK LIFTER WORKS

The RL3500 consists of two units working in tandem – one on each end of the server cabinet. Both units have a foot which is placed under the cabinet as a lifting platform.  The cabinet is then strapped between the two sections. The operator rotates the handle on one of the lifts to raise the cabinet slightly off the floor.  The process is repeated on the other lift until the load clears the floor.  The frictionless ball screw technology enables anyone to effortlessly lift up to 3,500 pounds/ 1,587 kg.

During transport the weight is evenly spread across eight dual non marking antistatic castor wheels to distribute the load on raised floors.   Once the desired position is achieved the load is lowered to the floor and the units removed.

RL3000 Manual Rack Lifter

RackLift™ RL3500 Benefits

  • Rack Mount Lift Supports Up To 3,500 Pound, 1,587 kg.  Cabinets
  • Operation Requires Only A Single Operator
  • Safe And Easy To Use
  • High Ratio Gearing Mechanism
  • Light Weight Aluminum, Small Footprint
  • Reduces Lost-Time Injuries
  • Improve Employee Morale
  • Increases Productivity
  • Reduces Equipment Damage
  • Accurate Alignment
  • Easy-To-Use And Maneuver
  • Load Remains In Place When Crank Is Released
  • Precise Height Control
  • Adapts To Any Standard 19″ Or 24″ Racks
  • Aircraft Aluminum Construction For Durability
  • Compact design For Easy Use And Storage

Capacity

Lifting Capacity3,500 lbs. 1,587 kg.
Lifting HeightLifts to 11 inches
Rack Size SuportedLifts any Size Rack
Insertion Distace1.70 inches 4.3 cm
Insertion Clearance Height1.70 inches 4.3 cm
RackLift Spin RadiusRack Depth plus 14 inches 35.5 cm

Physical Dimensions

Height46″
Width23″
Depth23″
Weight74lbs per side
Lift SystemTubular Swivel Side Wind Jack
FinishZinc Powder Coat
Freight Dimensions and Weight275lbs Wooden Crate Integrated Pallet